BOITIER DE PEDALIER PRAXIS M30 386 EVO ROAD BB

PRAXIS

M30-386EVO-FULL-1024x1024
M30-SPINDLE-GUIDE-1024x576
386EVO-FRAME-SPEC-1024x569

55,00

En stock

Description

PRODUCT M30-386EVO BB - For use with Press Fit 386EVO Road frames. voir photo
BUY THIS IF : You are installing a Praxis M30 alloy spindle crank into a Press Fit 386EVO road frame.
MEASUREMENT PF 386EVO = 46mm Diameter / 86.5mm Width
Helpful frame shell guide here
BEARINGS Cartridge Steel or Ceramic
30mm DRIVE / 28mm Non-DRIVE
Ceramic Bearings are Grade 5 / ABEC 5 rating
TOOL This specific M30 BB is a press fit. Use BB press tool/drift for installation, and a cup-removal tool for removal. These are very specific tools so talk to your local bike shop if you do not own them. See Instruction link below.
MFG Inject molded cups for this Press Fit 386EVO
INTRUCTIONS MANUAL HERE
AVG. WEIGHT 104g
EXTRA NOTE Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with our Praxis M30 spindles. A drive-side wave washer is used for preload of the bearings.
We also offer an M30 Bearing Rebuild Kit here if or when you want to refresh the bearings.
Infocrank M30-Note: The Infocrank M30 is not compatible with this Praxis M30 386EVO BB due to the Infocrank arm shape.

 

Je n'ai pas de compte,
je m'inscris

error check_circle
error check_circle remove_red_eye
error check_circle remove_red_eye

J'ai déjà un compte,